Sumitomo SM-Cyclo VHCS19060 Gear Drive/Speed Reducer 135HP 210:1 1750RPM

Sumitomo SM-Cyclo VHCS19060 Gear Drive/Speed Reducer 135HP 210:1 1750RPM gear pump is a rotary pump that relies on the working volume change and movement between the pump cylinder and the meshing gear to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go.
The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the discharge port of the gear pump depends entirely on the resistance at the pump outlet.
The concept of the gear pump is very simple, that is, its most basic form is the same size of the two gears in a tight fit with the internal rotation of the shell, the shell of the internal similar to the "8" shape, the two gear mounted inside , The outer diameter of the gear and the two sides with the shell closely. The material from the extruder enters the middle of the two gears at the suction port and fills the space, moving along the housing as the teeth rotate, and finally discharging when the teeth are engaged.
Our Company is proud to support our quality products with Sumitomo SM-Cyclo VHCS19060 Gear Drive/Speed Reducer 135HP 210:1 1750RPM services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; Sumitomo SM-Cyclo VHCS19060 Gear Drive/Speed Reducer 135HP 210:1 1750RPM inspections, hands on training and assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete Sumitomo SM-Cyclo VHCS19060 Gear Drive/Speed Reducer 135HP 210:1 1750RPM application review by combining the efforts of your operations and maintenance personnel with our design and application engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.

Sumitomo SM-Cyclo VHCS19060 Gear Drive/Speed Reducer 13.5HP 210:1 1750RPM

THIS ITEM IS USED. UNTESTED. HAS A 4-1/4" SHAFT.

SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-921-8848. THANKS FOR LOOKING.

IF YOU ARE CONCERNED WITH EBAYS ESTIMATE OF THE SHIPPING COST, EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50%

FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS...

CLICK HERE!

ITEM DETAILS:

APPROX DIMENSIONS:

40" X 24" X 26"

SHIPPING WEIGHT:

1066 LBS

OTHER DETAILS:

THIS ITEM IS LOCATED AT OUR HARTZ RD (19522) FACILITY.

SHIPPING:

WILL SHIP MOTOR FREIGHT TO ALL US, CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD.

THE BUYER IS RESPONSIBLE FOR ALL SHIPPING & HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS.

SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED.

ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING.

RETURN POLICY:

WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESNT WORK AT ALL UNLESS IT WAS LISTED AS BEING "PARTS ONLY" OR "NOT IN WORKING CONDITION." THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND.

ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER.

ADDITIONAL INFORMATION:

WE ACCEPT PAYPAL PAYMENTS, CREDIT CARDS (VISA / MASTER CARD / AMERICAN EXPRESS / DISCOVER), AND CASHIERS CHECKS.

PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURERS WARRANTY OR SUPPORT. HOWEVER, CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS.

BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. WE WILL NOT LEAVE FEEDBACK FOR BUYERS UNTIL WE RECEIVE FEEDBACK. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS.

BE SURE TO ADD US TO YOUR FAVORITES LIST AND CHECK OUT OUR OTHER ITEMS!

Sumitomo in the mainland of the cooperation process, to absorb a large number of cooperation agencies, to promote the hydraulic pump, motors, cylinders, hydraulic valves and other products flow, our company is a professional sales agent SUMITOMO Sumitomo spare parts products. Sumitomo Sumitomo products with a full range, low prices, fast delivery, after-sales service is guaranteed and other advantages, with the domestic SUMITOMO Sumitomo distributors, production plants, the use of customers, the establishment of a long-term supply and trust relationship. At the same time in order to shorten the delivery period to ensure that the customer's personal interests, but also specifically established SUMITOMO Sumitomo common spare parts